Graphene Coating

DustGo Graphene Coating, your trusted companion in automotive care is a specially formulated auto care solution. Graphene coating refers to a thin layer of graphene, a single layer of carbon atoms arranged in a two-dimensional honeycomb lattice, applied onto the Automobile Surface. Graphene is known for its remarkable properties, including high strength, conductivity, flexibility, and transparency. Thus providing a comprehensive solution for protecting and enhancing the appearance of vehicles, improving their longevity and maintaining their value over time.

Key benefits of Graphene Coating

1. Scratch Resistance: Graphene coatings can provide a durable protective layer that enhances the scratch resistance of vehicle surfaces, helping to maintain the paint finish over time.
2. Corrosion Protection: Graphene coatings act as a barrier against moisture and environmental contaminants, reducing the risk of corrosion on metal surfaces such as the car’s body and chassis.
3. Enhanced Gloss and Shine: Graphene coatings can create a deep, glossy finish on the vehicle’s paintwork, enhancing its appearance and making it stand out.
4. Hydrophobic Properties: Graphene coatings can make the vehicle surface hydrophobic, causing water to bead up and roll off, which facilitates easier cleaning and prevents water spots.
5. UV Protection: Graphene coatings can provide protection against UV radiation, helping to prevent paint fading and degradation caused by prolonged sun exposure.

Direction to Use
1.Gently shake the Graphene coating bottle before use.
2.Wash the vehicle by standard cleaner (free of wax and silicone). Rinse the car and wipe it with a dry micro-fiber cloth. The use of a clay bar cleaning process is also suitable.
3.Use the cloth and sponge to apply the coating, Proceed by coating small area at a time. Place some coating onto a cloth and apply it slightly without too much force on the surface. Apply the coating once in vertical and horizontal direction.
4.Working in small sections, spread the coating evenly over the surface of the mirror using gentle, overlapping strokes. Ensure complete coverage, paying attention to any edges or corners.
5.After applying the coating, wait for about 30 seconds to 2 minutes. (depending on temperature and humidity)
6.Use the towel to polish the surface, do not use excessive pressure to avoid removing too much of the finish.
7.Place the panels on each part of the surface with a medium distance.at 80C / 180F for about 20 minutes each part.
8.If having no access to IR Heater, wait for at least 5 hours before using the vehicle, however the coating is still far away from being fully cured, so avoid water drops on the surface for 3 days as it might impact the coating performance, and avoid brushing against the surface with bags or keys. Within the following 3 days the vehicle should not be cleaned specially in drive-through carwash.

Precautions
1.Keep out of reach of children and pets.
2.Avoid contact with eyes and skin. If contact occurs, rinse thoroughly with water.
3.Store in a cool, dry place, away from direct sunlight and extreme temperatures.
4 Do not use Fiber cloth directly on the surface incase of any dirt on the body.

Caution
The Product is intended solely use on Car Exterior surfaces. Use of Protective Gears Recommended. If irritation, redness, or discomfort occurs, discontinue use and seek medical advice immediately.

Disclaimer
While we strive to provide high-quality products, results or outcomes may vary due to application methods and working conditions.